1. Gear Material：Carbon steel, stainless
steel, Alloy steel, Copper(40Cr 40CrMo
20CrMnTi 20CrNiMo 45#steel)
2. Gear Size: by drawings
4. Bore: Finished bore
5. Module: 0.6~8
6. Heat Treatment: Harending & Tempering
7. Teeth Hardened: Hardness 55-65 HRC
8. Processing:Forging, hobbing, precision
machining, heat treatment, surface
- Main Parameters
Internal gears, also called ring gears, have the same standards as external gears, except that the teeth are cut into the inner diameter while the outside remains smooth. Internal gears can provide a compact solution, provide large speed reduction and reduce sliding wear action, and can be applied to a wide range of equipment and amplifiers; applications. Internal gears are widely used in light load applications.
An internal gear can be described as the opposite of an external gear, where the tooth points rather than away from the center, and takes the opposite position to the tip and the root of the tooth. The internal gear provides a compact parallel shaft transmission drive with large speed cuts. The ratio of using a standard spur gear is the same for the two external gears, but the center distance is smaller. In the case, it is necessary to have two parallel shafts rotating in the same direction, and the internal gear eliminates the use of idler gears.
Vanhon Offers OEM Service
45 Days After Advance Payment
High Frequency Induction Hardening and Tempering
Q1: What information will be highly appreciated for a quotation?
A: It will be preferred if you can offer us the drawings, heat treatment and surface treatment requirements, required quantity, quoted currency (USD or CNY), or samples.
Q2: Are you a trading company or factory?
A: Vanhon is a trading and factory located in Qingdao, Shandong.
Q3: What is your terms of payment?
A: T/T 50% in advance, and 50% before shipment. We'll show you the photos of the products and packages before you pay the balance.
Q4: Do you test all your goods before delivery?
A: Yes, Vanhon has adopted a strict quality management system and all the items will be inspected according to the inspection instruction with good inspection records.
Q5: How does your company ensure the quality of the raw material?
A: The steels are purchased from our domestic well-known steel mills. After receiving the raw material, the steel will be inspected by spectrograph imported from Germany. Besides, the furnace number of steel will be well-managed in our ERP system to ensure the traceability of our products.
Q6: How do you ensure the high quality of products?
A: With integral manufacturing processes, a strict quality control system and imported machines, we can manufacture high quality products.