Qingdao Vanhon Machinery Technology Co.,Ltd.

Industry News
The role of gearbox
Nov 10, 2021

Gears are used to transfer power from one part of the machine to another. For example, in a bicycle, it is the power gear from the pedal to the rear wheel. Similarly, in a car, gears transfer power from the crankshaft (the rotating shaft of power from the engine) to the drive shaft running under the car, which powers the wheels. We can connect any number of gears together, and they can have different shapes and sizes. Whenever we transfer electricity from one gear to another, we can do one of two things: gearbox bicycle gears increase speed: if you connect two gears together, one gear has more gears than the second, and the second each gear must turn faster to keep up. Therefore, this arrangement means that the second wheel turns faster than the first wheel, but with less force.

 The role of gearbox(图1)

Change direction: When two gears mesh together, the second one always turns in the opposite direction. So if one rotates clockwise, the second must rotate counterclockwise. We can also use special-shaped gears to turn the power of the machine through an angle. For example, in automobiles, the differential (the gearbox in the middle of the rear axle of a rear-wheel drive vehicle) uses bevel gears to turn the power of the drive shaft 90 degrees and turn the rear wheels.

 

The gearbox is a mechanical device used to increase/decrease torque by decelerating/increasing. It consists of two or more gears, one of which is driven by a motor. The output speed of the gearbox is inversely proportional to the gear ratio. Gearboxes are generally preferred in constant speed applications, such as conveyors and cranes, which can provide increased torque.

 

The gearbox includes a drive gear with a certain diameter, and another smaller gear gear connected to the drive mechanism (motor, wind generator, diesel engine, etc.) (if the driving speed of the driven mechanism is higher than the drive mechanism) diameter ( If the speed of the driven mechanism should be less than the speed of the driving mechanism) is connected to the driven mechanical load. Just the speed/torque increase/decrease or vice versa mechanism. This is a mechanical motor accessory.


If you are interested in our products, please tell us which materials, type, width, length you want.

  • Please allow the file to completely upload before submitting your form.
    Upload
    If you wish to upload another file, you may do so here.
    Upload
    If you wish to upload another file, you may do so here.
    Upload